Thermocutter Blades and Adaptors

Our Thermocutter Blades & Adaptors

Choose the Hot Knife blade to suit the purpose. These Hot Knife blades are designed so that heat is concentrated along the cutting edge in order to achieve the optimum cutting temperature. Prior to insertion in the material to be cut, the temperature of the blades will be between 100°C and 800°C, depending on the type of blade and the thermocutter used. The temperature to the blade cools down as it enters the material. The temperature depends on the thermal properties and heat conductivity of the material being cut and determines the cutting speed. The cutting edge is evenly heated because of the design of the blade's cutting flanges.

Blades with "SS" as part of their Model Number represent Stainless Steel Blades.

Note that some blades are only for use with the Zetz-24 (aka ZTS 24) and 25 (aka ZTS 25) Hot Knife Thermocutters.

Contact us for more information or to request a demo.

Brochure (including Blade models): Thermocutters Brochure (pdf)

Model T3

This is the most commonly used blade. It is used for many simple cutting applications.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T3-15	0.6 mm	15 mm
T3-30	0.6 mm	30 mm
T3-50	0.6 mm	50 mm
T3-90	0.6 mm	90 mm
T3-125	0.6 mm	125 mm

Model T2

Sharpened on two sides to prevent distortion, allows cutting in two directions. Ideal for cutting foam. T2-50 for trimming laminated solar panels.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T2-50	0.6 mm	50 mm
T2-100	0.6 mm	100 mm
T2-150	0.6 mm	150 mm
T2-200	0.6 mm	200 mm

Model T11

With angled cutting edge and parrot's beak to serve as guide hook.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T11-15	0.8 mm	15 mm
T11-30	0.8 mm	30 mm

Model T015

Blades listed below are spade shaped to be held vertically. Suitable for mounting installations.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T015-0-6	0.6 mm	35 mm
T015-0-8	0.8 mm	35 mm
T015-1-0	1.0 mm	35 mm

Models T01 and T02

With glide hooks that hook into the material and glides along cutting base.

To Purchase Click Here.

T02 and T02S0 for trimming laminated solar panels.
T02S0 is offset at 90° angle.

Blades	Thickness	Cutting Edge Length
T01	0.6 mm	6 mm
T02	0.8 mm	12 mm
T02S0	1.0 mm	12 mm

Model T04

With short, obtuse angled cutting edges, both sides are ground.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T04	0.6 mm	15 mm

Model T05

With wide blade back and reinforced cutting flange. Stable cutting. The high temperature blade is designed for heat sealing the cutting edges. For trimming laminated solar panels.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T05	0.6 mm	35 mm

Model T011

Standard blades, double edged, with concave cutting edges leading to a point— for cutting material at an oblique angle and at a high temperature. Can achieve a small radius on rounded cuts. Cuts staight into material without preparatory drilling.

To Purchase Click Here.

Used in De-burring blade for anti-static trimming of excess plastic from sprues without waste or tension cracks.

Blades	Thickness	Cutting Edge Length
T011-0-6	0.6 mm	10 mm
T011-0-8	0.8 mm	10 mm

Model T12

With long pointed blade flanges, ground both sides. For two-directional cuts. For cutting around templates. Also suitable for de-burring. T012-1-0 for trimming laminated solar panels.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T012-0-6	0.6 mm	35 mm
T012-0-8	0.8 mm	35 mm
T012-1-0	1.0 mm	35 mm

Model DPM10

Used for sheet plastics, asphalt roofing paper, roll stock and any high-heat application— Not designed fo continuous use.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
DPM10*	2.0 mm	15 mm
*For use with the Zetz-24/25 only.

Model T06

With a rounded edge to glide along cutting surface Heat sealing the edges to prevent fraying of synthetic fibers and textiles.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T06	0.6 mm	2 mm

Model T150-2P

Cutting Sling consists of adjustable arms plus Blade No. T151 which can be reshaped once.
Applications: For rounded, angular, concave and other shaped cuts. Shaping interior spaces, cutting hollows into foam materials such as PE, PS, PU, etc.

To Purchase Click Here.

Cutting Sling	Thickness	Blade Length
T150
Replacement Blade (T151)	.05 mm	110 mm

Model AZ106

Grooving (for use with Cutting Sling) for quick cutting of grooves and flutes in foam materials made of PE, PS, PU.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
AZ106	16-22 mm	16 mm

Model T013 & ATL

Blades have curved cutting edge and thick blade. High temperature blade suitable for long cuts under pressure. ATL Blades are the same as T013 Blades with the exception of being offset at a 45° angle.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T013-45	0.8 mm	45 mm
T013-45SS	0.8 mm	45 mm
T013-70*	1.0 mm	70 mm
T013-70-2.0*	2.0 mm	70 mm
T013-115*	1.0 mm	115 mm
*For use with the Zetz-24/25 only.

Model T08

Gives a clean cut which allows seamless joining of material in subsequent sealing or gluing operations. With evenly heated cutting edge and thick blade From 50 mm cutting length upwards. Suitable for thermoplastics with low melting points such as foam polyethylene, polystyrene, polyurethane. Roof and wall insulation boards up to 120 mm thickness. No gap, no cold bridge. Cutting profile gaskets of PVC and Neoprene rubber for windows and door frames without crushing the material.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T08-50	0.8 mm	50 mm
T08-75*	0.8 mm	75 mm
T08-100*	0.8 mm	100 mm
T08-120*	0.8 mm	120 mm
*For use with the ZETZ-24/25 ONLY

Specialty Thermocutter Hot Knife Blades

Models T10/T15/T30

Blades are designed for rapid heating to maximum temperature
The entire cutting edge must be used in the material to obtain full benefit of the heat and to maximize cutting efficiency. Blades are available in 5 cutting lengths and should be chosen according to thickness of material.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
T 10*	1.0 mm	10 mm
T 15*	1.0 mm	15 mm
T 30*	1.0 mm	30 mm
*For use with the ZETZ-24/25 ONLY

Model ATS

Ideal for removal of adhesive material or removal of plastic flashings. Scoop design with 1/8" sides.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
ATS 10	0.8 mm	10 mm
ATS 18	1.0 mm	18 mm

Model TS30

Heavy duty blade designed for removing plastic/rubber linings inside storage tanks. Scoop design with 3/8" sides. For use with ZETZ-24/25 only.

To Purchase Click Here.

Blades	Thickness	Cutting Edge Length
TS 30*	1.0 mm	30 mm
TS 30SB45*	1.0 mm	45 mm
TS 30SB60*	1.0 mm	60 mm
*For use with the ZETZ-24/25 ONLY

Model DT

Blades for cutting insulating material. Thick blade for controlled cutting, with constant temperature along the cutting edge. Blades available in 7 lengths, should be chosen according to thickness of material. For a length of more than 100 mm, use only on ZETZ-24/25 Hot Knife.

To Purchase Click Here.

--For anyone using foam insulation such as contractors, painters, interior fitters, insulating specialists.

--Roof and wall insulation boards up to 200 mm thickness made of PE, PS, PU.

--Quick and neat joining and fitting of insulation boards. Cutting time for 1 m long, 150 thick insulation board is 8 seconds.

Blades	Thickness	Cutting Edge Length
DT 50	1.0 mm	50 mm
DT 100	1.0 mm	100 mm
DT 150*	1.0 mm	150 mm
DT 200*	1.0 mm	200 mm
*For use with the ZETZ-24/25 ONLY

TFoot Adaptor

AZTC20 Foot Attachment use with T11-15 blade.

To Purchase Click Here.